Heating Cable Mat - Double line | ADV Group

OVER VIEW

The Cable Mat floor heating system is construction and installation methodology does not require any special tools and is quickly stuck to a clean subfloor using the attached adhesive tape strips. The ease of installation also makes them an ideal "Do-it-Yourself" or Trade kit without requirements or experience for planning their layouts.
And uncomplicated concept specifically designed for the professional user: the electrical heating cable is attached to a tough fibreglass mesh, rolled out before tiling, and connected to a programmable thermostat.
It is suitable for in tile-adhesive, thinset or in-screed floor heating applications directly beneath tile, stone, floating and timber floor finishes. Suitable sub-floors include concrete slabs, suspended timber, F/C sheet floors or existing tiles.

Benefits of Underfloor heating Cable Mat

1. Economical and environmentally friendly
Under floor heating provides heat where required, resulting in optimal heat utilization and minimal losses.
2. So simple to install
In addition to this wide range, mats could be designed to suit individual requirements of lengths and widths, heat loads and voltage requirements could be designed.
3. Flexible for Area
Cable Mat can be laid on any area, or any floor layout, as may be desired.
4. Thermostatically controlled
Close and uniform spacing of heating cables, associated with thermostat controls to select temperature requirements, provides higher comfort levels.

SPECIFICATION

Model	Voltage	Power	Length (m)	Square meter (L x W)	Installed out put (W/m)	Distance between heating cables C-C
EP20W 1.0M	220V	140W/h	7m	0.5 x 2m = 1㎡	20	Within 15cm
EP20W 1.5M	220V	210W/h	10.5m	0.5 x 3m = 1.5㎡
EP20W 2.0M	220V	280W/h	14m	0.5 x 4m = 2.0㎡
EP20W 3.0M	220V	420W/h	21m	0.5 x 6m = 3.0㎡
EP20W 4.0M	220V	560W/h	28m	0.5 x 8m = 4.0㎡
EP20W 5.0M	220V	700W/h	35m	0.5 x 10m = 5.0㎡
EP20W 6.0M	220V	840W/h	42m	0.5 x 12m = 6.0㎡
EP20W 8.0M	220V	1120W/h	56m	0.5 x 16m = 8.0㎡
EP20W 10.0M	220V	1400W/h	70m	0.5 x 20m = 10.0㎡
EP20W 12.0M	220V	1680W/h	84m	0.5 x 24m = 12.0㎡